Variable-rate Piezocone Inversion of Effective Stress Strength in Soft Clays: A Comprehensive Analytical Framework
DOI:
https://doi.org/10.66525/ijictt151Keywords:
Piezocone Penetration Testing, Soft Clay, Variable Rate, Effective Stress, Inversion AlgorithmAbstract
The accurate characterization of effective stress strength parameters in soft clays remains a critical challenge in geotechnical engineering, particularly given the complex drainage conditions that emerge during in situ testing. Piezocone penetration testing has traditionally been conducted at a standard constant rate, which predominantly assumes fully undrained conditions in fine-grained soils. However, this assumption often leads to significant inaccuracies when estimating the effective friction angle and cohesion, as partial drainage can occur even in clays. This paper presents a comprehensive analytical framework for the variable-rate piezocone inversion of effective stress strength in soft clays. By systematically varying the penetration velocity, the transition from undrained to partially drained and fully drained conditions is captured. An inversion algorithm is subsequently developed to extract fundamental effective stress parameters directly from the continuously measured cone tip resistance and pore water pressure data. The methodology relies on a theoretical mapping between the normalized penetration velocity and the degree of consolidation surrounding the advancing cone. Field investigations were conducted at a well-characterized soft clay test site to validate the proposed framework. The inverted effective stress parameters demonstrate a high degree of correlation with high-quality laboratory triaxial test results. The findings establish that variable-rate piezocone testing, coupled with the proposed inversion methodology, provides a robust, continuous, and highly reliable approach for profiling effective stress strength in challenging soft clay deposits, ultimately improving the safety and economy of geotechnical design.
Downloads
References
1. Li, H., Zheng, T., Peng, Y., & BouDagher-Fadel, M. K. (2023). The fusulinids in a middle-late Permian carbonate platform (from Maokou to Wuchiapingian stage) in eastern Sichuan Basin, China. In Stratigraphy & Timescales (Vol. 8, pp. 413-435). Academic Press.
2. Ouyang, Z. F. (2019). Effective stress strength of clays evaluated from piezocone and flat dilatometer tests (Doctoral dissertation, Georgia Institute of Technology).
3. Guo, F., Zhang, R., Zhou, H., Zhang, J., & Mo, H. (2026). Dynamic temporal scale decoupling and variable interaction modeling for photovoltaic power forecasting. Solar Energy, 318, 115021.
4. Ouyang, Z., & Mayne, P. W. (2018). Effective stress strength parameters of clays from DMT. Geotechnical Testing Journal, 41(5), 851-867.
5. Sun, M., Liang, D., Wang, J., Bate, B., & Xue, F. (2026). Clarity in DEM cementation predictions: Integrating automated machine learning and interpretability analysis of shear wave velocity. Advanced Engineering Informatics, 69, 104060.
6. Peng, Y., & Li, H. (2023). Benthic foraminiferal morphogroups at the end-Guadalupian extinction in eastern Sichuan Basin, China. Palaeogeography, Palaeoclimatology, Palaeoecology, 618, 111522.
7. Yu A, Pang F, Yuan Y, et al. Simultaneous current and vibration measurement based on interferometric fiber optic sensor[J]. Optics & Laser Technology, 2023, 161: 109223.
8. Wang, L., Liu, F., Chen, M., Mao, Z., Chen, G., Zhang, Z., & Xiang, Z. (2025). Synergizing machine learning and multiscale shakedown method for shakedown loading capacity evaluation of parameterized lattice structures. Extreme Mechanics Letters, 75, 102297.
9. Ouyang, Z., & Mayne, P. W. (2020). Effective Stress Friction Angle of Normally Consolidated and Overconsolidated Intact Clays from Piezocone Tests. Geotechnical Engineering (0046-5828), 51(2), 111.
10. Ouyang, Z., Mayne, P. W., & Agaiby, S. (2024). In situ test-based evaluation of soil effective stress strength properties and stress history. In Databases for Data-Centric Geotechnics (pp. 344-368). CRC Press.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Ka-Lun Chu (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in the International Journal of Information and Communication Technology Trends (IJICTT) are distributed under a Creative Commons license. This allows readers to freely access, share, and adapt the content for non-commercial purposes, provided proper attribution is given to the original authors. Authors retain copyright of their work.
